FAQ – Mineral Wall Panels

If you can’t find your question below please feel free to use our contact form.


General information
What are the 3DWalldecor mineral wall panels made of?
The mineral wall panels are mainly made of high grade industrial gypsum, with glass fibres for reinforcement. Plaster molding – calcium sulfate hemihydrate Class 1 EN 13279-1, Water, f2 mineral fibers
How many panels are in a box?
Each box contains 4 panels and covers 1m². Each panel measures 50 x 50 cm.
How thick are the panels?
Each panel is 1 cm thick.
What is the weight of a single panel?
Each panel weighs 4/4,5 kg.
How do I clean the panels after installation?
The panels can be dusted with a dry cloth. If necessary, you can even use a slightly moist clean cloth.
Are the panels hollow?
Yes. This way, the weight of each panel can be reduced with 30%.
Do the panels also improve sound?
3DWalldecor wall panels are primarily designed as wall decorations. Although acoustic improvements have been experienced, these effects have not been tested yet.
What colour are the 3DWalldecor wall panels?
The wall panels are a natural and standard white color, but can be finishied in any desired color.
Are the 3DWalldecor wall panels moisture resistant?
Yes. However they should not come into direct contact with water. Application of wall panels in (bath)rooms where there is often a lot of steam is not advisable.
How do I install the wall panels?
We recommend using gypsum or plaster glue to be applied at the area at the back of each panels that is in direct contact with the wall, or a mounting kit
How do I fill seams?
Because 3DWalldecor mineral wall panels are a modular product, small seams may occur after mounting the panels on the wall. These seams can be filled using gypsum or a (paintable) acrylic filler. To avoid cracks in the paint make sure the acrylic filler dries properly before finishing the wall in desired color.
Can I cut the wall panels?
Yes, you can. Panels are best cut using a rotary tool or angle grinder.
What kind of paint should be used?
Once the panels have been attached to the wall, they can be painted. We recommend a matted water based latex paint, although other kinds of paint (both water and oil based) can be used. Any colour can be applied. Panels can be painted with a brush or a paint sprayer.
Are the panels fire retardant?
Yes. For European standards, these panels are classified as: Euroclass A1 (no contribution to fire) Decision 96/603/EC
Do the wall panels meet European safety standards?
Yes, 3DWalldecor has had extensive safety testing carried out.
The wall panels meet all European standards with regard to; fire safety, water absorption, moisture resistance and expansion rate under various conditions.


Can’t find your question?

Feel free to ask us your question using the contact form.